top of page

OtherSideExperience Group

Public·10 members
Craig Holiday
Craig Holiday

How to Install and Activate Autocom CDP Pro 2013.1 Software



How to Install and Activate Autocom CDP Pro 2013.1 Software




Autocom CDP Pro is a professional diagnostic tool that supports cars, trucks and generic OBD vehicles. It can perform various functions such as reading and erasing fault codes, live data, actuator tests, service reset and more. In this article, we will show you how to install and activate Autocom CDP Pro 2013.1 software on your computer.




autocom cdp pro 2013 1 keygen torrent


Download Zip: https://www.google.com/url?q=https%3A%2F%2Fblltly.com%2F2tJQcf&sa=D&sntz=1&usg=AOvVaw0Ba1xM_TSVoRtoyD0KMpbj



Step 1: Download the software




You can download the Autocom CDP Pro 2013.1 software from the following torrent link: https://mhhauto.com/Thread-Autocom-CDP-2013-R1-FULL-Torrent-Activator-HW-Keygen. You will need a torrent client such as uTorrent or BitTorrent to download the file. The file size is about 2.8 GB and contains the software installation files, the activator, the serial keygen and the instructions.


Step 2: Install the software




Before installing the software, you need to disconnect from the internet and turn off your antivirus software. Then follow these steps:


  • Run the setup.exe file from the CDP2013R1 folder and follow the installation wizard.



  • Select your language and accept the license agreement.



  • Choose your installation path and click Next.



  • Select your interface type (USB or Bluetooth) and click Next.



  • Wait for the installation to complete and click Finish.



Step 3: Activate the software




To activate the software, you need to generate a serial number and a hardware key based on your hardware ID. Then you need to replace some files in the installation folder with the ones from the activator. Here are the detailed steps:


  • Run the Autocom_Delphi Serial HW Keygen 2013.1.exe file from the Autocom_Delphi Serial HW Keygen 2013.1 folder.



  • Enter your hardware ID (you can find it in My Computer > Properties > Hardware > Device Manager > Ports (COM & LPT) > USB Serial Port) and click Generate.



  • Copy the serial number and the hardware key that are generated.



  • Run the Autocom CDP+ software from your desktop shortcut or Start menu.



  • Paste the serial number and the hardware key in the activation window and click Activate via USB.



  • Wait for the activation to complete and click OK.



  • Close the software and go to your installation folder (usually C:\\Program Files\\Autocom\\).



  • Copy all the files from the Activator 2013.1 folder and paste them in your installation folder, replacing the existing files.



  • Run the Autocom CDP+ software again and enjoy!



Step 4: Update the firmware




After activating the software, you may need to update the firmware of your Autocom CDP Pro interface. This will ensure the compatibility and functionality of the device. To update the firmware, follow these steps:


  • Connect your Autocom CDP Pro interface to your computer via USB cable.



  • Run the Autocom CDP+ software and go to Settings > Hardware setup.



  • Click Test and wait for the test to complete.



  • Click Update and wait for the update to complete.



  • Click OK and disconnect your interface.



Step 5: Connect to a vehicle




Now you are ready to use your Autocom CDP Pro interface to diagnose a vehicle. You can connect to a vehicle via USB cable or Bluetooth. Here are the steps for both methods:


USB connection




  • Connect your Autocom CDP Pro interface to your computer via USB cable.



  • Connect the OBD connector of your interface to the vehicle's OBD port.



  • Run the Autocom CDP+ software and go to Settings > Hardware setup.



  • Click Test and wait for the test to complete.



  • Click OK and go back to the main menu.



  • Select your vehicle make, model and year from the list and click Start.



  • Select the system you want to diagnose and follow the instructions on the screen.



Bluetooth connection




  • Pair your Autocom CDP Pro interface with your computer via Bluetooth. You can find the pairing code on the back of your interface.



  • Connect the OBD connector of your interface to the vehicle's OBD port.



  • Run the Autocom CDP+ software and go to Settings > Hardware setup.



  • Select Bluetooth from the drop-down menu and click Search.



  • Select your interface from the list and click Test.



  • Wait for the test to complete and click OK.



  • Go back to the main menu and select your vehicle make, model and year from the list and click Start.



  • Select the system you want to diagnose and follow the instructions on the screen.



e0e6b7cb5c


About

Welcome to the group! You can connect with other members, ge...

Members

bottom of page